Hardware & Findings
All guides filed under Hardware & Findings.
Solid Brass vs Zinc Alloy Leather Hardware: What Lasts
Solid brass and zinc-alloy leather hardware can look identical in the bag, but they age in opposite directions: solid brass is one consistent metal that patinas and can…
D-Ring and O-Ring Selection for Leather: Size, Metal, Weld
Choosing a D-ring or O-ring for leather comes down to three specs: inner width to match your strap, metal grade for the load, and whether the ring is…
How to Finish Zipper Ends on Leather: Tabs That Stay Flat
The clean way to finish a zipper end on leather is a folded tab skived to about 1–1.5mm at the fold, so it caps the raw tape without…
Best Zippers for Leather Goods: YKK Sizes, Metal vs Coil
The best zipper for most leather goods is a YKK #5 brass metal zipper for structured pieces and a YKK #3 nylon coil for slim, soft ones —…
Sewing Zippers Into Leather: The Complete Guide
Sewing a zipper into leather comes down to three decisions made in order: pick a zipper whose tooth size matches the leather weight, glue the tape down before…
Setting Rivets and Snaps in Leather: A Clean-Strike Guide
Setting rivets and snaps cleanly comes down to three things: the right setter for that exact cap size, a hard backing under the work, and a single confident…
Best Hardware for Leather Dog Collars: Buckles, Snaps, and Welded Rings
The best hardware for a leather dog collar is solid cast brass or 316 stainless in three pieces: a center-bar or heel-bar buckle, a welded D-ring, and a…
How to Attach Strap Hardware Without Rivets Pulling Through
Strap hardware pulls through for one reason: a single rivet or hole carries the entire load in one spot, and leather slowly tears a slot around it until…
Leather Buckle Types Compared: Roller, Center Bar, Heel Bar
If you are choosing a leather buckle, the type is decided by how the buckle anchors the strap, not by its looks: roller buckles take the friction off…
Leather Hardware Guide: Rivets, Snaps, Buckles, Setting
Leather hardware is the small metal kit — rivets, snaps, buckles, screws, eyelets, and D-rings — that turns a stitched leather piece into a usable object. The right…