All Guides
Every tutorial, technique deep-dive, and tool guide on the site.
How to Make a Leather Key Fob: The 30-Minute First Project
A leather key fob is the fastest real project in leatherwork: one strap of 5–7 oz veg-tan, a single fold around a split ring, one rivet, and about a…
How to Make a Leather Mouse Pad and Desk Mat: Cut, Edge, and Lay Flat
A leather mouse pad or desk mat is the simplest project in the whole small-goods category and the most unforgiving: one flat panel of 8–9 oz veg-tan, cut clean,…
Leather Stains and Damage Fixes: The Complete Removal Guide
The first move in removing any stain from leather is identifying what the leather is before you touch the mark. Veg-tan absorbs water and solvents into the fibers…
Leather EDC Projects: The Everyday-Carry Small Goods Guide
Leather EDC projects are the small, hard-used carry goods you can finish in an afternoon on a modest bench: key cases, fobs, AirPods sleeves, pen slips, sunglasses pouches,…
Leather Jacket Alterations: Taking In, Shortening and Refitting
A leather jacket can be taken in, shortened, and have its sleeves slimmed or cropped — but it can almost never be let out, because the old needle…
How to Make a Leather Sunglasses Case: Soft Pouch vs Hard Form
A leather sunglasses case comes in two honest forms: a soft stitched pouch in 2–3 oz that packs flat and protects against scratches, or a wet-formed hard shell in…
How to Make a Leather AirPods Case: Pattern, Snap, and Fit
A leather AirPods case is a snug wrap of 4–5 oz veg-tan around the charging case, closed with a single line-20 snap, with a cutout or gap that clears…
How to Make a Leather Key Case: Six-Hook Pattern and Clean Folds
A leather key case tames a loose jangle of keys into a slim, silent fold. The classic pattern is a folded 3–4 oz veg-tan wrap around a six-hook rack,…
How to Make a Leather Phone Sleeve That Actually Fits Your Phone
A leather phone sleeve that actually fits is built to your phone’s real girth, not its spec sheet. Two panels of 3–4 oz veg-tan, stitched up three sides, sized…
Best Leather Weight for a Dog Collar: Why 8-10 oz Bridle Wins
The best leather weight for a dog collar is 8–10 oz (3.2–4.0 mm) bridle leather for most dogs. That weight carries a buckle and welded ring without folding,…
Working With Garment Leather: Cut, Glue and Sew Soft Hide
Working with garment leather comes down to one rule: stop treating it like firm leather. Stabilize it, cut it clean in a single pass, skive away bulk at…
Sewing Machine Thread for Leather: Tex Sizes & Types
The right thread for sewing leather on a machine is bonded nylon or bonded polyester, sized in the Tex or V system and matched to your machine’s ceiling…