Posts by Kenny Nyhus Fadil
Every tutorial, technique deep-dive, and tool guide on the site.
Best Stitch Length for Leather: Wallets, Belts, and Bags Compared
The best stitch length for leather depends on project type and leather weight: 3mm spacing for wallets and small goods (4-6 oz leather), 4mm for belts and medium…
Best Edge Bevelers for Leather: Size 1 vs 2, Top Brands Ranked
The best edge bevelers for leather are the Crimson Hides Pro Bevelers (45-65 dollars per size) for premium use, the Tandy Pro Series (12-18 dollars per size) for…
Best Leather for Wallets: Thickness, Type, and Grain Explained
The best leather for wallets is full-grain vegetable-tanned cowhide in 3-4 oz weight (1.2-1.6mm thickness), tanned by Hermann Oak, Wickett & Craig, or Horween. Full-grain provides the natural…
Leatherworking Starter Kit: What You Need vs Wasted Money
The right leatherworking starter kit costs 80-150 dollars and includes one piece of 5-6 oz vegetable-tanned leather, four diamond stitching irons (2mm, 3mm, 4mm, 5mm spacing), a wooden…
3D-Printed Leather Tooling: Stamps, Edge Slickers, and Form Blocks
Three categories of 3D-printed leather tooling are worth printing: decorative stamps in PETG (any pattern, $0.20 in filament vs $25-$60 commercial), edge slickers in PLA-CF (sized exactly for…
Laser Engraving on Vegetable-Tanned Leather: Settings That Avoid Burn-Through
Vegetable-tanned leather engraves cleanly on a 5W diode laser at 100% power and 1200-1500 mm/min, single pass; on a 40W CO2 at 18-22% power and 250 mm/sec, single…
How to Price Handmade Leather Goods (The Material x 4 Formula Explained)
Most handmade leather goods are priced using the Material x 4 formula: total material cost (leather, thread, hardware, finish) multiplied by 4 gives a baseline retail price that…
How to Set Snaps on Leather Without a Press (Hand Tool Method)
Set leather snaps without a press in three steps: punch a clean hole the size of the snap post (usually 1/8″ or 5/32″), insert the four snap parts…
How to Make a Leather Card Holder (Slim Wallet Pattern)
A hand-stitched leather card holder is the smallest practical first project: 3 panels cut from 3 to 4 oz veg-tan leather, glued, edge-bevelled, saddle stitched around the perimeter,…
How to Dye Leather Without Streaks or Blotches (Technique + Prep)
Streaks and blotches in leather dye come from one of three causes: surface oils blocking absorption (handprints, dust, manufacturing residue), an applicator that drags dye instead of spreading…